Transfiller Yoke

The Zeagle Transfiller can be used to transfer air from a standard Scuba Yoke Valve to any cylinder with a RaZor Reg/Valve installed.

The Transfiller has a yoke on one end and a stainless steel quick disconnect on the other end. The QD fitting on this Transfiller also fits most paintball gun storage gas bottles used today. The Transfiller is not recommended for RaZors mounted in tanks larger than 10 cu ft, because the weight of larger cylinders can damage the Transfiller during use.


read more
$81.95MSRP
Quantity
Overall Rating
1 2 3 4 5
Your Rating
1 2 3 4 5
NEVER DISCONNECT THE HIGH PRESSURE QD FROM THE RAZOR WHEN THE TRANSFILLER IS STILL PRESSURIZED.

Attaching the Transfiller to the Source Bottle

Transfiller in use 

--

Transfiller in use

Filling

The collar on the QD Fitting is pulled back to allow the Transfiller to be coupled to the Filling Probe on the RaZor Reg/Valve. When the collar is released, the QD Fitting will firmly hold and seal the Filling Connection.


Before filling, make sure that the knurled bleed collar is closed by turning it fully in either direction

To Fill, the Scuba Tank Valve is opened. If the air pressure in the Scuba Tank is greater than the pressure in the RaZor's tank, then air will open the check-valve in the RaZor and begin flowing into the RaZor's tank. When the sound of moving air stops, the Scuba Tank Valve is shut and the Bleed Collar on the Transfiller is turned. This will allow air pressure to escape from the Transfiller and it can then be removed from the QD Fitting on the RaZor. The waterproof Cap is then replaced on the Probe of the RaZor's QD fitting.